Dell PowerEdge 400SC 하드웨어 설치 매뉴얼 - 페이지 7
{카테고리_이름} Dell PowerEdge 400SC에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 400SC 48 페이지. Processor upgrade installation guide
Dell PowerEdge 400SC에 대해서도 마찬가지입니다: 업데이트 (1 페이지)
페이지 인쇄
NOTICE: Be careful not to bend any of the pins when you remove the processor from
the socket. Bending the pins can permanently damage the processor.
Remove the processor from the socket and leave the release lever in the release
9
position so that the socket is ready for the new processor.
Align pin 1 (the imprinted corner) of the processor and pin 1 of the socket.
10
See Figure 1-5.
NOTICE: Processor pins are delicate. To avoid damage, ensure that the processor aligns
properly with the socket, and do not use excessive force when you install the processor.
Carefully set the processor in the socket and press it down lightly to seat it.
11
Rotate the release lever back toward the system board until it snaps into place,
12
securing the processor.
F i g u r e 1 - 5 .
I n s t a l l i n g t h e P r o c e s s o r
processor pin-1 indicator
Remove the thermal grease protective cover from the heat sink.
13
NOTICE: If your heat sink has cooling pipes, orient the heat sink so that the cooling pipes are
toward the memory modules to prevent damage to system board components.
socket pin-1 indicator
release lever
Pr ocessor Upgrade Installation Guide
processor
socket
1-5