Dell PowerEdge 4200 Series 설치 매뉴얼 - 페이지 20

{카테고리_이름} Dell PowerEdge 4200 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4200 Series 28 페이지. Dell poweredge 4200 servers: installation guide
Dell PowerEdge 4200 Series에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 랙 설치 (34 페이지)

페이지 인쇄
Dell PowerEdge 4200 Series 설치 매뉴얼
1-14
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Removing the Front Bezel

To remove the system front bezel, perform these steps:
1.
Remove the system cover (see Figure 1-12).

Figure 1-12. Removing the System Cover

a.
Turn the keylock on the back edge of the cover to the unlocked position.
b.
Slide the cover about a centimeter (half an inch) toward the back of the
system.
c.
Grasping the top of the cover at both ends, lift it away from the chassis.
2.
With your fingertips, gently pry loose the four tabs along the right edge of the
bezel, and disengage the three clips on the opposite edge from the chassis
(see Figure 1-13).
3.
Rotate the bezel to the left to disengage and remove it.
keylock
system cover