Dell POWEREDGE 4300 교체 매뉴얼 - 페이지 2

{카테고리_이름} Dell POWEREDGE 4300에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell POWEREDGE 4300 3 페이지. System board upgrade
Dell POWEREDGE 4300에 대해서도 마찬가지입니다: 설치 정보 (6 페이지), 설치 매뉴얼 (28 페이지), 랙 설치 (37 페이지), 업그레이드 설치 매뉴얼 (14 페이지), 랙 설치 (34 페이지), 업그레이드 매뉴얼 (23 페이지), 업그레이드 매뉴얼 (24 페이지), 설치 지침 매뉴얼 (12 페이지), 설치 정보 (6 페이지), 설치 매뉴얼 (14 페이지)

handle release

cable strain-

relief clips (3)

power supply handle

(must be completely

open to insert the

power supply)

power supply

Rotate the power supply handle to the closed position.

As you rotate the handle, pivot levers on the handle hinge engage into slots in the

chassis and push the power supply into the chassis. If the power supply does not

slide into the chassis, reposition the power supply and ensure that the power

supply handle is completely open before you try rotating the handle again.

With the power supply fully inserted into the chassis, push in on the handle until

the handle latches into place.

NOTE: The power supply will not function until the latch is engaged.

Connect the AC power cable to the power supply and route the cable through the

cable strain-relief clips on the power supply handle.

Connect the AC power cable to the power outlet.

latch