Dell PowerEdge 4400 랙 설치 - 페이지 25

{카테고리_이름} Dell PowerEdge 4400에 대한 랙 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4400 34 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 4400에 대해서도 마찬가지입니다: 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (20 페이지), 설치 매뉴얼 (28 페이지), 랙 설치 (37 페이지), 업데이트 매뉴얼 (8 페이지), 정보 업데이트 (8 페이지), 사용자 설명서 (42 페이지), 하드웨어 설치 매뉴얼 (40 페이지), 설치 매뉴얼 (36 페이지), 매뉴얼 (15 페이지)

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

support.dell.com

Align the slide-assembly mounting-bracket flange (on the front of the slide

assembly) with the square holes in the front vertical rails (see Figure 8).

Push the slide assembly forward until the mounting hooks are located in their

respective square holes on the vertical rail, and then push down on the mounting-

bracket flange until the mounting hooks engage the square holes in the front

vertical rail, allowing the push button to pop out and click.

7 .

At the back of the cabinet, pull back on the mounting-bracket flange until the

mounting hooks are located in their respective square holes, and then push down

on the mounting bracket flange until the mounting hooks engage the square

holes on the back vertical rail, allowing the push button to pop out and click.

Repeat steps 4 through 7 for the remaining slide assembly on the other side of

the rack.

Ensure that the rails are mounted at the same position on each side of the rack.

Installing the Shoulder Screws and the Rack Adapters

CAUTION: The computer may weigh up to 32 kilograms (kg) (70 pounds

[lb]) when fully loaded. To prevent personal injury, do not attempt to move

the computer by yourself.

Lay the computer on its left side and remove the feet from the computer:

Using a small flat-blade screwdriver, unscrew the screw securing each foot.

Pull each foot from the chassis.

Remove the rubber plugs from the screw holes on the computer's side panel.

DELL CONFIDENTIAL - Preliminary

9/8/00

Rack Installation Guide