Dell PowerEdge 4820 매뉴얼 - 페이지 8
{카테고리_이름} Dell PowerEdge 4820에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4820 11 페이지. Rack enclosures
Dell PowerEdge 4820에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지), 매뉴얼 (12 페이지), 매뉴얼 (8 페이지), 기술 매뉴얼 (37 페이지)
페이지 인쇄
Cable Routing Procedures for Dell™ PowerEdge™ R515 Systems
Figure 6: Right-Side Mounted CMA Installation
KVM dongle placed outside the basket
for Right-Side Mounting.
Section 2: Cabling a Dell™ PowerEdge™ R515 System Without a CMA
NOTE: The CMA on Dell™ PowerEdge™ R515 systems is optional. Without the CMA installed, the
system must be powered down and all cables disconnected before it can be removed from the rack.
2.1 Routing the Cables
1.
Connect all applicable cables to the rear of the system and verify that all connections are secure.
2. Using the hook and loop straps supplied with the rail kit, bundle the cables and secure them to
either the left or right CMA attachment brackets as described in the
See Figure 7 for an example of data cables secured to the left CMA bracket and power cables
secured to the right CMA bracket.
It is recommended that the cables be secured to the outer brackets, but cables may be secured to
3.
the inner brackets as well if desired.
Rack Installation Instructions
.
Page 6