Dell PowerEdge 4x00 Series 설치 매뉴얼 - 페이지 14

{카테고리_이름} Dell PowerEdge 4x00 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4x00 Series 28 페이지. Rack installation guide
Dell PowerEdge 4x00 Series에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 사용자 설명서 (42 페이지), 랙 설치 (34 페이지), 설치 매뉴얼 (37 페이지)

Dell PowerEdge 4x00 Series 설치 매뉴얼
1-8
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide

Figure 1-6. Removing the Cable Tray

Removing the System From the Rack

The subsections that follow include instructions for removing the system from the
rack and removing the rails and other hardware associated with the rack installation
of the system.

Removing the System

To remove the system from the rack, perform these steps.
WARNING: If you are removing more than one system, first remove the
system in the highest position. Never pull more than one system out of the
rack at a time.
1.
Slide the system out of the rack until the slides lock in the extended position.
WARNING: Because of the size and weight of the system, never attempt to
remove the system from the slide assemblies by yourself.
2.
Press the green button near the end of each interior slide to release the slide
locks (see Figure 1-7), and then slide the system completely out of the rack.
back of computer
cable tray
6-32 x 0.25-inch screws (5)