Dell PowerEdge 4x00 Series 설치 매뉴얼 - 페이지 17

{카테고리_이름} Dell PowerEdge 4x00 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 4x00 Series 28 페이지. Rack installation guide
Dell PowerEdge 4x00 Series에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 사용자 설명서 (42 페이지), 랙 설치 (34 페이지), 설치 매뉴얼 (37 페이지)

Dell PowerEdge 4x00 Series 설치 매뉴얼
support.dell.com
vertical rail
10-32 x 0.5-inch
screws (2)
front of rack

Figure 1-9. Removing the Slide Assemblies

2.
Repeat step 1 to remove the slide mounting screws at the back of the rack.
3.
Lift the slide assembly out of the rack and place it out of the way.
Repeat this step to remove the slide assembly on the opposite side of the rack.
4.
To remove the cage nuts (used to secure the rack-adapter thumbscrews) from
each vertical rail, use a flat-blade screwdriver or the cage-nut installation tool
(if available), pry down on the outside top edge of the cage nut while pushing
inward on the cage nut to remove it from the vertical rail (see step 3 in
Figure 1-10).
Repeat this step to remove the remaining cage nuts.
5.
Package all the rack installation hardware you removed and label it for future use.
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
slide-assembly
mounting-bracket
flange
alignment
marks
slide
assemblies (2)
slide alignment screws
1-11