Dell PowerEdge 6350 랙 설치 - 페이지 6

{카테고리_이름} Dell PowerEdge 6350에 대한 랙 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 6350 34 페이지. Dell poweredge 6350 servers: install guide
Dell PowerEdge 6350에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 랙 설치 (34 페이지), 랙 설치 (35 페이지)

페이지 인쇄

viii

To help protect your system/components from sudden, transient increases and

decreases in electrical power, use a surge suppressor, line conditioner, or un-

interruptible power supply (UPS).

Position system cables and power cables carefully; route system cables and the

power cable and plug so that they cannot be stepped on or tripped over. Be sure

that nothing rests on your system components' cables or power cable.

Do not modify power cables or plugs. Consult a licensed electrician or your

power company for site modifications. Always follow your local/national wiring

rules.

To help avoid possible damage to the system board, wait 5 seconds after turning

off the system before removing a component from the system board or discon-

necting a peripheral device from the computer.

Handle batteries carefully. Do not disassemble, crush, puncture, short external

contacts, dispose of in fire or water, or expose batteries to temperatures higher

than 60 degrees Celsius (140 degrees Fahrenheit). Do not attempt to open or ser-

vice batteries; replace batteries only with batteries designated for the product.

Turn down the volume before using headphones or other audio devices.

Observe the following additional safety guidelines for your system:

Unless your installation and/or troubleshooting documentation specifically allows

it, do not remove enclosure covers, attempt to override the safety interlocks, or

access any components inside the system. Depending on your system, installa-

tion and repairs may be done only by individuals who are qualified to service your

computer or storage system equipment and trained to deal with products capa-

ble of producing hazardous energy levels.

When connecting or disconnecting power to hot-pluggable power supplies, if

offered with your Dell product, observe the following guidelines:

— Install the power supply before connecting the power cable to the power

supply.

— Unplug the power cable before removing the power supply.

— If the system has multiple sources of power, disconnect power from the sys-

tem by unplugging all power cables from the power supplies.

Move products with care; ensure that all casters and/or stabilizers are firmly con-

nected to the computer or storage system. Avoid sudden stops and uneven

surfaces.