Dell PowerEdge 6400 매뉴얼 - 페이지 6

{카테고리_이름} Dell PowerEdge 6400에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge 6400 10 페이지. Wake-on-lan (wol) support on dell servers
Dell PowerEdge 6400에 대해서도 마찬가지입니다: 랙 설치 (37 페이지), 업그레이드 설치 매뉴얼 (42 페이지), 랙 설치 (34 페이지), 설치 매뉴얼 (42 페이지), 설치 매뉴얼 (37 페이지), 설치 (4 페이지), 조립 및 설치 (32 페이지), 매뉴얼 (10 페이지), 매뉴얼 (15 페이지)

페이지 인쇄
Dell PowerEdge 6400 매뉴얼
4
SCSI Backplane Option
1
Ultra3 SCSI cable connector (SCSIA)
2
Ultra3 SCSI cable connector (SCSIB)
3
Cooling fan power cable connector (FAN)
4
Power connector (POWER)
5
System-board data cable connector (PLANAR)
13. Connect the power cable labeled "HD-B/P" to the connector labeled "POWER" on
the backplane board.
14. Connect a SCSI cable from the connector labeled "SCSIA" on the backplane board
to the connector labeled "PRIMARY SCSIA" on the system board, or to a SCSI
host adapter card.
15. If you want to operate the backplane in a split 2 x 4 configuration, connect a SCSI
cable from the connector labeled "SCSIB" on the backplane board to the second
Ultra3 SCSI connector on the system board, or to a SCSI host adapter card.
NOTES: When the 2 x 4 SCSI backplane is cabled to two SCSI host adapter
cards, the SCSI host adapter cabled to the 2 x 4 backplane's SCSIA connector will
control the four top hard-disk drives of a rack-mounted system (or the four left-
most hard-disk drives of an upright free-standing system) with SCSI IDs 0, 1, 2,
and 3; and will control the four bottom hard-disk drives of a rack-mounted system
(or the four rightmost hard-disk drives of an upright free-standing system) with
SCSI IDs 4, 5, 8, and 9.