Dell POWEREDGE 840 정보 업데이트
{카테고리_이름} Dell POWEREDGE 840에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell POWEREDGE 840 1 페이지. Sas/raid controller installation
Dell POWEREDGE 840에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지), 설치 지침 매뉴얼 (7 페이지)
페이지 인쇄
FJ099ap0.fm Page 9 Wednesday, September 6, 2006 3:10 PM
Dell™ PowerEdge™ 840 Systems
Information Update
This document provides updated information for your system on the following topic:
Using the Setup Password
When a setup password is enabled for the System Setup program, the system gives you one chance to
enter the setup password correctly. If you enter the password incorrectly, the system displays an error
message and opens the System Setup program for viewing only. You will not be able to change any of the
System Setup fields except for the system password. If you have already entered the system password
during the current session, you can change the system password if the Password Status field is set to
Unlocked. To change the Password Status field from Locked to Unlocked, you must enter the correct
setup password.
___________________
Information in this document is subject to change without notice.
© 2006 Dell Inc. All rights reserved. Printed in Malaysia.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this
document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in
trademarks and trade names other than its own.
September 2006