Dell PowerEdge C2100 사용 지침 - 페이지 19

{카테고리_이름} Dell PowerEdge C2100에 대한 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge C2100 32 페이지. Poweredge series
Dell PowerEdge C2100에 대해서도 마찬가지입니다: 포트폴리오 매뉴얼 (27 페이지)

페이지 인쇄

Table 1-19. IPMI Settings

Settings

Enable IPMI Over LAN

Channel Privilege Level Limit

Encryption Key

Table 1-20. VLAN Settings

Settings

Enable VLAN ID

VLAN ID

Priority

Platform Events

All alert settings can be enabled or disabled. To change the setting for all alerts, perform the

following steps:

1 Enter all event actions and alerts.

2 To activate all alert settings that have been defined in the Set Platform Events window, mark

the Enable Platform Event Filter alerts checkbox.

3 To deactivate all alert settings that have been defined in the Set Platform Events window,

clear the Enable Platform Event Filter alerts checkbox.

4 Click Apply Changes.

The Platform Event Filters List displays the actions that execute when an event occurs. An event

occurs when the status of a system element is outside a set limit. The event list also indicates if an

alert is enabled or disabled for each event.

Table 1-21 provides the Actions and Alerts that can occur when an event is out of bounds. Only one

action can be set for each event.

Description

Enable IPMI LAN Channel

The maximum privilege level that can be accepted on the LAN

Channel.

Format: 0 to 20 bytes (even number of hexadecimal characters, no

blank spaces are allowed).

Description

If enabled, only matched VLAN ID traffic is accepted.

VLAN ID field of 802.1g fields. Enter a valid value for Virtual LAN ID

(must be a number from 1 to 4094).

Priority field of 802.1g fields. Enter a number from 0 to 7 to set the

Priority of the Virtual LAN ID.

Using the Baseboard Management Controller