Allied Telesis AT-9800 Series 구성 방법 - 페이지 5

{카테고리_이름} Allied Telesis AT-9800 Series에 대한 구성 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis AT-9800 Series 9 페이지. How to set up pppoe between a linux client and access concentrator
Allied Telesis AT-9800 Series에 대해서도 마찬가지입니다: 릴리스 노트 (5 페이지), 빠른 설치 매뉴얼 (12 페이지), 방법 (8 페이지)

페이지 인쇄
Allied Telesis AT-9800 Series 구성 방법
7. Give the VLANs IP addresses
8. Configure VRRP
Turning on adoptvrip means that the master adopts the VRRP IP address. This means you
can use the VRRP IP address to ping the current master, or to connect to it through telnet,
SSH, HTTP, SSL or SNMP. Also, DNS relay continues functioning via the same IP address at all
times.
Page 5 | AlliedWare™ OS How To Note: VRRP
enable ip
add ip int=vlan1 ip=192.168.1.1
add ip int=vlan2 ip=192.168.2.1
add ip int=vlan3 ip=192.168.3.1
...
enable vrrp
create vrrp=1 over=vlan1 ipaddress=192.168.1.3 priority=150
adoptvrip=on
create vrrp=2 over=vlan2 ipaddress=192.168.2.3 priority=150
adoptvrip=on
create vrrp=3 over=vlan3 ipaddress=192.168.3.3 priority=150
adoptvrip=on
...
Core 1 (master) configuration