Cradlepoint COR IBR600 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cradlepoint COR IBR600에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cradlepoint COR IBR600 9 페이지. Integrated broadband router
Cradlepoint COR IBR600에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 매뉴얼 (12 페이지)

페이지 인쇄

White Paper

COR IBR600 Vehicle Installation Guide

MECHANICAL AND THERMAL

Electronics mounted in vehicles may subject to

high levels of mechanical and thermal stress. It is

important to understand that these parameters be

addressed to ensure a reliable installation.

Be sure the router is securely mounted

within the vehicle. For example with the

COR IBR600 family of routers includes a

mounting bracket. This bracket can hold the

router solidly in most installations. In high

shock environments it may be advisable to

add a supplemental cable tie to secure the

router in the bracket.

Vibration can cause early failure if not

reduced to an acceptable level. Using the

same COR IBR600 mounting bracket as

an example, special anti-vibration rubber

grommets such as the Keystone 773

(available from DigiKey) may be used. Insert

the grommets and then tighten the screw to

the point where the grommet just begins to

compress to provide vibration isolation.

Thermal ratings must be taken into

consideration for reliable operation. All

devices and components used in the

installation are subject to the same thermal

stresses. The COR IBR600 is rated for

ambient temperatures from -20 °C to 60 °C

(-4 °F to 140 °F). Various power conditioners

may have lower or higher ratings. Take care

that your installation is within the thermal

ratings of each device.

The ambient thermal environment may

be affected by many factors. Lack of

ventilation, being mounted in an auxiliary

box, or being mounted where the sun heats

it can all increase the relative ambient

temperature. Care must be taken to

understand these thermal aspects.

Fig 6. COR IBR600 Mounting Bracket

+1.855.813.3385

cradlepoint.com