Dell PowerEdge R200 업데이트 매뉴얼 - 페이지 2

{카테고리_이름} Dell PowerEdge R200에 대한 업데이트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R200 28 페이지. Suse® linux enterprise server 9
Dell PowerEdge R200에 대해서도 마찬가지입니다: 설치 매뉴얼 (28 페이지)

페이지 인쇄

Removing and Installing the Optional SATA

Optical Disk Drive

The following section updates the optical disk drive removal and installation

procedures in your system documentation.

Removing the Optical Drive

CAUTION:

Only trained service technicians are authorized to remove the system

cover and access any of the components inside the system. Before you begin this

procedure, review the safety instructions that came with the system.

1 Turn off the system and attached peripherals, and disconnect the system

from the electrical outlet and peripherals.

2 Open the system. See "Opening the System" in your Hardware Owner's

Manual.

3 Disconnect the SATA power and data cables from the optical drive.

See Figure 1.

4 Press the bracket release lever that secures the optical drive to the hard

drive 0 carrier.

5 Lift and tilt the optical drive up and out of the bracket.