Dell PowerEdge R320 매뉴얼 - 페이지 11

{카테고리_이름} Dell PowerEdge R320에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R320 11 페이지. Poweredge series
Dell PowerEdge R320에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (11 페이지), 사양 (2 페이지), 포트폴리오 매뉴얼 (27 페이지), 시작하기 매뉴얼 (9 페이지), 시작하기 매뉴얼 (9 페이지)

페이지 인쇄

Cable Routing Procedures for Dell PowerEdge R320 & R420 Systems

Section 4: Cabling a PowerEdge R320 or R420 system installed

on static rails

NOTE: The CMA is compatible only with the sliding rails, not the static rails.

1. Follow the instructions contained in the Rack Installation Instructions found in the static rail kit to

install the server into a two-post or four-post rack.

2. Install the hook-and-loop straps provided in the rail kit through the slots in the rear brackets of the

rails as described in the Rack Installation Instructions.

3. Connect all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook-and-loop straps, bundle the cables and secure them to either the left rail or right

rail as described in the Rack Installation Instructions. See Figure 12 for an example of data cables

secured to the left rail and power cables secured to the right rail (as viewed from the rear of the

system).

Figure 12.

Cabling a system installed in static rails