Dell PowerEdge R410 매뉴얼 - 페이지 5
{카테고리_이름} Dell PowerEdge R410에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R410 12 페이지. Entry 2-socket 1u rack server
Dell PowerEdge R410에 대해서도 마찬가지입니다: 문서 업데이트 (14 페이지), 배포 매뉴얼 (10 페이지), 정보 업데이트 (38 페이지), 업데이트 매뉴얼 (44 페이지), 포트폴리오 매뉴얼 (27 페이지), 사양 (2 페이지), 기술 매뉴얼북 (48 페이지)
Cable Routing Procedures for Dell™ PowerEdge™ R310 & R410 Systems
1.2 Installing the Inner CMA Attachment Bracket
As described in the
Rack Installation Instructions,
attachment bracket based on which side you wish to mount the CMA. Use the bracket marked "A" for
mounting the CMA on the left side, and the bracket marked "B" for mounting on the right side. See
Figure 2.
Figure 2: Attaching the Inner CMA Attachment Bracket
1.3 Routing the Power Cables Through the Strain Reliefs
After you have installed the tray and cables, route the power cables through the strain reliefs located
on the power supply handles as shown in Figure 3.
Figure 3: Routing Power Cables Through the Strain Reliefs
1.4 Routing the Cables Through the CMA
You can install the CMA on either the rear right or rear left side of the rails. Mounting the CMA on the
side that is opposite of the power supplies (left-side mount) is recommended; otherwise, the CMA
must be disconnected, to some extent, in order to remove the power supplies. Refer to Section 3 for
details on power supply replacement.
locate and attach the appropriate inner CMA
Page 3