Dell PowerEdge R620 설치, 유지 관리 및 문제 해결 매뉴얼 - 페이지 24
{카테고리_이름} Dell PowerEdge R620에 대한 설치, 유지 관리 및 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R620 48 페이지. Poweredge series
Dell PowerEdge R620에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지), 시작하기 매뉴얼 (12 페이지), 설치 지침 (2 페이지), 설치 지침 (2 페이지), 포트폴리오 매뉴얼 (27 페이지), 시작하기 매뉴얼 (10 페이지)
페이지 인쇄
Chapter 2: Installation
Dell R620 Rear View
Item
1
2
3
4
5
6
7
24
Avaya CMS Dell R720 and R620 Computer Hardware Installation
Indicator, Button, or
Connector
System identification
button
System identification
connector
iDRAC7 Enterprise
port
Serial connector
PCIe expansion card
slot (riser 2)
Video connector
USB connectors (2)
Icon
Description
The identification buttons on the front and
back panels can be used to locate a
particular system within a rack. When one
of these buttons is pressed, the LCD panel
on the front and the system status indicator
on the back blink until one of the buttons is
pressed again.
Press to toggle the system ID on and off. If
the system stops responding during POST,
press and hold the system ID button for
more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2
iDRAC setup) press and hold for more than
15 seconds.
Allows you to connect the optional system
status indicator assembly through the
optional cable management arm.
Dedicated management port.
NOTE: The port is available for use only if
the iDRAC7 Enterprise license is installed
on your system.
Allows you to connect a serial device to the
system.
Allows you to connect a PCIe expansion
card.
Allows you to connect a VGA display to the
system.
Allows you to connect USB devices to the
system. The ports are USB 2.0-compliant.
October 2015