Dell PowerEdge R805 System 솔루션 매뉴얼 - 페이지 30

{카테고리_이름} Dell PowerEdge R805 System에 대한 솔루션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R805 System 40 페이지. Vmware esx server 3i
Dell PowerEdge R805 System에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (21 페이지)

페이지 인쇄

Appendix C: Sample Step-by-Step Management

Network Configuration

This appendix guides you through a sample management network setup with

the following parameters.

•

Redundant management NICs (on-board NICs)

•

Static address of 172.17.13.211/24 (255.255.255.0) gateway: 172.17.13.1

•

Host name of: EmbedESX1.VMwareFarm.lab

•

DNS servers: 172.17.28.10 and 172.17. 28.252

Configure Redundant Management NICs

1 With the main management network screen displayed (see Figure 10),

scroll and select "Network Adapters".

2 By default, the first LAN-On-Motherboard (LOM) NIC is automatically

selected as the management network NIC. This example configures two

NICs to help guard against loss of management network connectivity due

to NIC failure. Scroll to the second LOM listed ("Embedded NIC 2") in

the list (Figure 19) and press the SPACE bar to select, adding an 'X' to the

box in front of the NIC. To maximize your redundancy, you may want to

select one LOM and one NIC port of an add-on Ethernet card.

Note the status of all NICs is listed here. This will help you determine

basic connectivity with your upstream switches; however, this status does

not imply connectivity at the IP-address level.

Also, note the relationship of the "Device Name" and "Hardware Label";

the device name follows a Linux-kernel numbering schema by starting its

numbering at zero while the hardware label corresponds with the

numbering on the physical system, starting at one.

Solution Guide