Dell PowerEdge R805 System 솔루션 매뉴얼 - 페이지 33

{카테고리_이름} Dell PowerEdge R805 System에 대한 솔루션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R805 System 40 페이지. Vmware esx server 3i
Dell PowerEdge R805 System에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (21 페이지)

페이지 인쇄

5 From the Configure Management Network screen (see Figure 10), select

"DNS Settings". You will notice the current settings are summarized on

the right of the screen; press ENTER to enter the configuration screen (see

Figure 22).

6 Because you have set an IP address statically, you will not have the option

to use DHCP supplied information for the primary and secondary DNS

servers. If you decide to use DHCP for the IP address, you will be able to

select either option.

7 Enter a fully qualified domain name (FQDN) for your host. Press <ESC>

to return to the main network configuration screen. You may also enter

only a host name in this field, but, if you do, you will need to specify one or

more DNS suffixes in the "DNS suffixes" section.

8 If you would like to specify a DNS suffix, you may enter it using the last

entry on this screen. This should be blank if a FQDN was specified in the

previous step.

9 With configuration complete, press ENTER to save your settings. Press

<ESC> to exit the network setting screen and press "Y" to indicate that

you understand saving your modified setting will require the management

network to be restarted causing a momentary loss of connectivity to the

management network only (VM networks will not be affected).

Solution Guide