Dell PowerEdge R900 업데이트 - 페이지 2
{카테고리_이름} Dell PowerEdge R900에 대한 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R900 4 페이지. Rack installation guide information update
Dell PowerEdge R900에 대해서도 마찬가지입니다: 설치 매뉴얼 (3 페이지), 빠른 매뉴얼 (2 페이지)
페이지 인쇄Back Cooling Fans
Systems manufactured after September 2008 no longer include the four back
cooling fans installed in earlier systems. Therefore, BMC version 2.27 does not
recognize the presence of back fans. The back fans will still run in older systems;
however, from a system perspective, the fans do not exist and are not monitored.
As a result, if the back fans fail, the SEL, server management software, and
remote access card will not log the error. This change does not compromise the
standard hot plug and redundancy features of the front fans.
New LCD Error Codes
The following LCD error codes have been added for your system. For a complete
list of error codes, see "About Your System" in your Hardware Owner's Manual.
Table 1. LCD Status Messages
Code
Test
EB107 Proc
Machine
Check Error
EB113 PCIE Fatal
Error Slot
XX
E1A18 PDB Ctrl
Cable
E1118 CPU Temp
Interface
Causes
CPU detected an
unrecoverable hardware
error.
CPU detected an
unrecoverable hardware
error.
PDB control cable is
missing, loose, or faulty.
Processor has exceeded
acceptable temperature
and has been disabled to
prevent damage.
Corrective Actions
See error EB113 for
specific information on
what hardware failed.
"XX" indicates the slot
associated with the failed
hardware. If you are unable
to resolve the issue, see
"Getting Help" in your
Hardware Owner's Manual.
Reseat the cable. If
problem persists, replace
the cable. See "Getting
Help" in your Hardware
Owner's Manual.
See "Troubleshooting
System Cooling" in your
Hardware Owner's Manual.