Dell PowerEdge R910 정보 업데이트 - 페이지 14

{카테고리_이름} Dell PowerEdge R910에 대한 정보 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerEdge R910 17 페이지. Poweredge series
Dell PowerEdge R910에 대해서도 마찬가지입니다: 문서 업데이트 (14 페이지), 업데이트 매뉴얼 (32 페이지), 업데이트 (3 페이지), 하드웨어 설치 (2 페이지), 정보 업데이트 (14 페이지), 업데이트 매뉴얼 (44 페이지), 포트폴리오 매뉴얼 (27 페이지)

Removing Memory Modules

WARNING:

system has been powered down. Allow time for the memory modules to cool

before handling them. Handle the memory modules by the card edges and avoid

touching the components on the memory module.

CAUTION:

You should only perform troubleshooting and simple repairs as authorized in

your product documentation, or as directed by the online or telephone service

and support team. Damage due to servicing that is not authorized by Dell is not

covered by your warranty. Read and follow the safety instructions that came

with the product.

CAUTION:

installed in any memory socket that is not occupied. Remove memory-module

blanks only if you intend to install memory modules in those sockets.

1 Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet.

2 Open the system. See "Opening the System" in the Hardware Owner's

Manual.

3 Remove the memory risers. See "Removing a Memory Riser" in the

Hardware Owner's Manual.

4 Press the tabs in the direction of the arrows and lift the memory

module cover. See Figure 3.

CAUTION:

not to touch the middle of the memory module.

5 Press down and out on the ejectors on each end of the socket until the

memory module pops out of the socket.

6 Press the four tabs and close the memory module cover. See Figure 3.

Information Update

The memory modules are hot to the touch for some time after the

Many repairs may only be done by a certified service technician.

To ensure proper system cooling, memory-module blanks must be

Handle each memory module only on either card edge, making sure