EARTHBOARD EBII 빠른 시작 매뉴얼

{카테고리_이름} EARTHBOARD EBII에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EARTHBOARD EBII 2 페이지.

Congratulations on your EARTHBOARD EBII with high draw upgrade! Your EBII is capable of using the rechargeable

Battery provided for higher draw pedals. You may also use the Power Station AC adapter instead of the battery.

To understand how pedals attach to Gravity Boots along with Gravity Boot Tethers, take a look at the

quick start guide was written referencing our other model, but the use of the Gravity Boots, Gravity Boot Tethers remains the

same.

Dual

Battery

Inputs

To pedal

or from

AC adapter

Additional Notes:

• For the high draw upgrade use both battery tethers provided, with one plugged into each USB output on the battery. Then

plug them into the board. If the board does not power immediately, press the reset button on the battery, top left side. The

blue LED lights up on the board when powered.

• Important! The EBII can be powered by battery OR AC Adapter power. Not both at the same time.

• When changing pedals, we recommend you turn power off to the EARTHBOARD.

• Like any electronic equipment, the EBII should be handled properly. Your EBII has electrical short protection in the

battery & the Power Station AC adapter. Avoid exposure to liquids.

Quick Start Guide.

CONTINUED ON BACK OF PAGE.......

The

To pedal

or from

AC adapter