Dell PowerVault DR4100 모범 사례 매뉴얼 - 페이지 32

{카테고리_이름} Dell PowerVault DR4100에 대한 모범 사례 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault DR4100 41 페이지. Backup and recovery appliance
Dell PowerVault DR4100에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (10 페이지), 매뉴얼 (37 페이지), 릴리스 노트 (16 페이지), 매뉴얼 (12 페이지), 매뉴얼 (24 페이지), 매뉴얼 (23 페이지), Qiuck 설정 (1 페이지), 매뉴얼 (27 페이지), 매뉴얼 (25 페이지)

Dell PowerVault DR4100 모범 사례 매뉴얼
administrator@DR2>
netmask 255.255.255.0
administrator@DR2 > network --create_eth --nwif eth3 --static --ip 172.20.23.2 --netmask
255.255.255.0 –-restart
administrator@DR2 > network --show
6.
Ensure connectivity of DR2 eth2 and eth3 by pinging the gateway using the following command:
network --ping --destination <destination_ip_address> --interface <ethN>
administrator@DR2 > network --ping --destination 172.20.21.1 --interface eth2
administrator@DR2 > network --ping --destination 172.20.23.1 --interface eth3
7.
Add route from DR2 eth2 to DR1 eth2 and from DR2 eth3 to DR1 eth3 using the following commands:
network --route --add --network <ip_address> --netmask <mask> --gateway <gateway_ip> --interface
<eth0,eth1,ethN>
network --show --routes
administrator@DR2 > network --route --add --network 172.20.20.2 --netmask 255.255.255.0
--gateway 172.20.21.1 --interface eth2
administrator@DR2 > network --route --add --network 172.20.22.2 --netmask
255.255.255.0 --gateway 172.20.23.1 --interface eth3
administrator@DR2 > network --show --routes
Destination
172.20.20.0
172.20.22.0
8.
Add route from DR1 eth2 to DR2 eth2 and from DR1 eth3 to DR2 eth3 using the following commands:
network --route --add --network <ip_address> --netmask <mask> --gateway <gateway_ip> --interface
<eth0,eth1,ethN>
network --show –routes
32
DR4100 Best Practice Guide | April 2014
network --create_eth --nwif eth2 --static --ip 172.20.21.2 --
Gateway
Mask
172.20.21.1
255.255.255.0 eth2
172.20.23.1
255.255.255.0 eth3
Example
Example
Example
Interface