DH Wireless Solutions PDN Genesis S2 현장 매뉴얼 - 페이지 9

{카테고리_이름} DH Wireless Solutions PDN Genesis S2에 대한 현장 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DH Wireless Solutions PDN Genesis S2 20 페이지.

PDN Genesis

7 . Once you have established effective Internet access, log off the network and push

the unit's Standby Button, the LED light will turn off, indicating gateway services

have been turned off . Avoid leaving the gateway on when not in use, as it will

continue to drain the batteries as long as it is connected to power .

8 . Locate AC charging cord, lift the weather cover on the recessed AC receptacle,

and plug in the unit . At this time observe the status lights on the on-board battery

charger . The current charge level will be shown on the Battery Gauge LEDs .

If 30 days have passed since the last charge, it will likely show low charge .

Allow the battery to charge until Battery Gauge indicates full-charge status .

9 . Return to storage, leaving Main Power Switch in the "ON" position while

plugged into available live AC power source .

Record your maintenance data in the Maintenance Log on pages 16-19.

Note: All passthrough ports, caps, seals and gaskets should be inspected periodically to

ensure a tight fit. Contact DHWS for information regarding PDN remote updates or other

maintenance needs . If you are experiencing ongoing issues with your PDN or would like to

order parts, contact DHWS at 877 .524 . 0 430, option 3 . For online support ticketing or incident

reporting, visit www .portablessupport . c om .

TROUBLESHOOTING

1 . If unit fails to power up, check to ensure Main Power Switch is in the on position .

Then check the Battery Gauge to ensure batteries are sufficiently charged . Unit

can run at the same time it is being charged by AC power source .

2 . If batteries need to be charged, connect supplied AC Power Cord to unit's AC

Charging Port and then plug into a live 110-120V AC power source . Main Power

Switch must be "ON" and Battery Gauge will scale to indicate PDN is charging .

3 . If WiFi does not appear on your device, ensure cellular gateway is active by

checking status lights .

4 . Should a power related issue persist, or to learn more about your on-board

SmartSource (S

Field Manual

), visit www .portablessupport .com .

877.524.0430