Dell PowerVault MD3200 Series 배포 매뉴얼 - 페이지 36

{카테고리_이름} Dell PowerVault MD3200 Series에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PowerVault MD3200 Series 38 페이지. Storage arrays
Dell PowerVault MD3200 Series에 대해서도 마찬가지입니다: 업데이트 매뉴얼 (32 페이지), 랙 설치 지침 (2 페이지), 지원 매트릭스 (12 페이지), 설치 매뉴얼 (18 페이지), 배포 매뉴얼 (38 페이지), 정보 업데이트 (1 페이지), 지원 매트릭스 (17 페이지), 기술 매뉴얼북 (40 페이지), 백서 (22 페이지), 배포 매뉴얼 (38 페이지)

Least Queue Depth With Subset

The least queue depth with subset policy is also known as the least I/Os, or

least requests, policy. This policy routes the next I/O request to a data path

that has the least outstanding I/O requests queued. For this policy, an I/O

request is simply a command in the queue. The type of command or the

number of blocks that are associated with the command are not considered.

The least queue depth with subset policy treats large block requests and small

block requests equally. The data path selected is in the path group of the

RAID controller module that owns the virtual disk.

Load balancing with the PowerVault MD3200 series is only available for

Windows Server 2008 and later versions of the operating system. You can

change the load balance policies from the default round robin with subset by

using one of the following:

•

Device Manager options

•

Disk Management options

Changing the Load Balance Policy Using Windows Server 2008 Device

Manager Options

1 Right-click My Computer and select Manage to open the Computer

Management window from the host desktop.

2 Click Device Manager to show the list of devices attached to the host.

3 Right-click the multi-path disk device for which you want to set load

balance policies, then select Properties.

4 Select the load balance policy you want to set for this disk device from the

MPIO tab.

Appendix—Load Balancing