Dell Precision Workstation 350 설치 매뉴얼 - 페이지 16

{카테고리_이름} Dell Precision Workstation 350에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Precision Workstation 350 32 페이지. Dell poweredge 350 servers: supplementary guide
Dell Precision Workstation 350에 대해서도 마찬가지입니다: 정보 업데이트 (30 페이지)

페이지 인쇄
Dell Precision Workstation 350 설치 매뉴얼
1-10
Rack Installation Guide
3.
Move the system back with its inside rail engaging the mounting bracket. Slide
the system completely into position and secure it to the rack using the captive
fasteners at the outer edge of the front panel (see Figure 1-8).
An internally threaded stud projecting from the front of the tray flanges accepts
the captive fastener on the front of the system.
captive
fasteners

Figure 1-8. Securing the System in the Rack

4.
Attach the front bezel, if it was removed in step 1, to the system (see the
Installation and Troubleshooting Guide for instructions).

Installing Tab Covers

CAUTION: The system's two-post flush-mount slide assembly does not have
a safety stop. Use care when sliding the system in and out of the rack; the
system could fall out of the rack, possibly resulting in bodily injury and
damage to the system.
1.
Push the system completely into the rack.
2.
Center the thumbscrew on the tab cover with the clearance hole on the system
tab, and align the slot on the tab cover with the opening on the system tab (see
Figure 1-9).