Dell PS4110 하드웨어 사용 설명서 - 페이지 8
{카테고리_이름} Dell PS4110에 대한 하드웨어 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell PS4110 48 페이지. Storage arrays
Dell PS4110에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지), 하드웨어 매뉴얼 (50 페이지), 개요 (7 페이지), 설치 (2 페이지)
페이지 인쇄
Hardware Owner's Manual
Table 1
describes the front panel features.
Figure 3: Front Panel Features and Indicators (3.5-inch Drives)
Figure 4: Front Panel Features and Indicators (2.5-inch Drives)
Item Indicator
Icon
Array status
1
LED
2
Power LED
Drive Release
3
None
Latch
The LEDs are part of a built-in chassis control panel that is not hot-swappable and can be replaced only
Note:
by support personnel. During the array power-up sequence, these LEDs will cycle through different states until
the array is fully started and the active control module has been determined.
4
Table 1: Front Panel Feature Descriptions
Description
The array status LED lights when the array power is on.
•
Off—No power.
•
Steady blue—Array status is OK.
•
Slow blinking blue—Array status is Standby mode.
•
Blinking blue—Administrator request to identify the array (see the Group
Manager online help).
•
Steady amber—Critical status.
•
Blinking amber—Warning.
The power LED is ON when at least one power supply is supplying power to the
array.
•
Off—No power, or the array is in Standby mode.
•
Steady green—Array has at least one power supply providing power, and
array is not in Standby mode.
Enables you to remove a drive from the array.
1 Basic Storage Array Information