Avue Outdoor 36x with WDR 사용자 설명서 - 페이지 9
{카테고리_이름} Avue Outdoor 36x with WDR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avue Outdoor 36x with WDR 15 페이지. High speed dome camera series
페이지 인쇄6.OSD - System Setting
System Setting
SYSTEM SETTING
In system setting menu, you can modify operation and
EDIT DOME LABEL
display setting, such as dome label, temperature and
INITIAL INFO
display of various value on the operational screen.
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
Dome Label:
EDIT DOME LABEL
1. use UP or DOWN to change the charactor.
2. use RIGHT to move to next char.
：
LABEL
ENTRANCE
3. use RIGHT to move to last char and save.
BACK
4. use Left to first char and cancel.
EXIT
Initial information:
I N I T I A L
I N F O
Shows the information about current setting.
SPEED DOME V1.00
PROTOCOL：FACTORY
DOME ADDRESS：001
COMM：4800,N,8,1
BACK
EXIT
Display setup
DISPLAY SETUP
Actuvate the display for the on-screen info in operaton
mode.
DOME LABEL
OFF
Dome label:
PRESET LABEL
OFF
Preset label:
Zoom label:
ZOOM LABEL
ON
Zone label:
ZONE LABEL
OFF
Direction label:
DIRECTION LABEL
ON
Temperature label:
TEMPERATURE
LABEL
OFF
shows the cur. temp in the speed dome
BACK
EXIT
13
Some products may not be available in your country, please contact our distributor for more details
the name of dome
shows the labe of every preset
shows zoom factor on screen
shows the zone name
shows the coordinates
6.OSD - Motion, Clear
Motion control
MOT IO N
AUTO FLIP
ON
AUTO FLIP
PROPORTION PAN
ON
180°
PARK TIME
005
PROPORTIONAL PAN:
PARK ACTION
SCAN
the dome will adjust the pan and tilt speed
POWER UP ACTION AUTO
automatically for comfortable viewing.
FAN ENABLED
040
PARK TIME:
TEMP C/F
CENT
ADVANCE SETTING
custom defined action( park action).The range is
BACK
from 1 to 240 minutes. This function can be
EXIT
deactivated by setting the minute to 0.
PARK ACTION:
the idle time (park time). Selectable between Preset,
Scan, Pattern (Nr), Tour or None.
POWER UP ACTION:
be started after power up and self test. Selectable
between Auto,Preset 1, Scan, Pattern (Nr), Tour or
None. By selecting Auto, the dome will resume the
last action before power off.
FAN ENABLED:
temperature.
TEMP C/F:
Fahrenheit.
Advance Setting
ADVANCE SETTING
EIS ENABLED
N/A
EIS ENABLED:
PRESET FREEZEN
OFF
function is variable on certain camera modul.
AUTO FOCUS
OFF
PRESET FREEZEN:
DEFOGGER
015C
AUTO FOCUS:
HEAD UP
OFF
DEFOGGER:
BACK
EXIT
HEAD UP:
combine with Camera Flip function.
CL EAR
Clear
You can clear setting's memory or reset the camear to
factory default. The follwing functions are supported:
CLEAR ALL ZONES
CLEAR ALL PRESETS
- Clear Zones
CLEAR ALL PATTERNS
- Clear all presets
CLEAR ALL TOURS
- Clear all patterns
CLEAR ALL WINDOWS
FACTORY DEFAULTS
- Clear all tours
RESTART
- Clear all windows
BACK
- Factory defaults
EXIT
Warning: The clear action can not be undone.
once a item is cleared it is impossible to
retrieve the deleted setting. Please make sure
that the requested clear action is desired.
Some products may not be available in your country, please contact our distributor for more details
: Auto. Image flip in tilt range from 90° to
depends on the zoom factor,
defines the idle time prior to start a
the action which will be started after
defines the action which will
Activate Fan when the dome reach the
Switch the temperature unit between Celius and
Enable „ lectric mage tabilization". This
E
I
S
Freeze the image immediately.
Switch ON/OFF the Auto Focus
Activate Heater/Fan on the cold temperatur.
Switch ON/OFF the proportional PT moving. Can
14