Dell VEP4600 설치 매뉴얼 - 페이지 24

{카테고리_이름} Dell VEP4600에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VEP4600 40 페이지.
Dell VEP4600에 대해서도 마찬가지입니다: 설정 매뉴얼 (23 페이지), 설치 매뉴얼 (40 페이지)

DC PSU LEDs

1. DC PSUs

● Solid green—Input voltage ok and output good.

● Flashing yellow (amber)—There is a Standby mode or PSU failure (OC, OT, OV, Fan fault).

● Off—PSU is off.

AC power supply installation

NOTE:

The PSU slides into the slot smoothly. Do not force a PSU into a slot as this action may damage the PSU or the

platform.

NOTE:

Ensure that you correctly install the PSU. When you install the PSU correctly, the power connector is on the left

side of the PSU.

NOTE:

If you use a single PSU, install a blank plate in the other PSU slot. If you are only using one power supply, install the

power supply in the first slot, PSU1. Install a blank plate in the second slot, PSU2.

1. Pull out the PSU slot cover.

2. Remove the PSU from the electro-static bag.

3. Insert the PSU into the platform PSU slot—insert the exposed PSU connector first.

The PSU slot is keyed so that you can only fully insert the PSU in one orientation. When you install the PSU correctly, it

snaps into place and is flushed with the back of the platform.

1. PSU installation

4. Plug in the appropriate AC 3-prongs cord from the platform PSU to the external power source.

5. Repeat steps 1 through 4 if you have a redundant PSU using the second PSU slot.

NOTE:

The VEP4600 powers up when you connect the cables between the power supply and the power source.

Power supplies