Dell VxRail G560 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Dell VxRail G560에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VxRail G560 33 페이지.
Dell VxRail G560에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지)
페이지 인쇄
3
drives 6-11 mapped to sled 2
5
drives 18-23 mapped to sled 5
7
EST tag
Front view of the control panels
Figure 4. Front view of the left and right control panels
Table 1. Control panel
Item
Indicator or button
1
left control panel
2
right control panel
3
power-on indicator or system
state indicator or power button
for sleds 1 and 3
4
system identification button for
sleds 1 and 3
5
power-on indicator or system
state indicator or power button
for sleds 2 and 4
8
Overview
4
6
8
Icon
Description
-
The power-on indicator and system identification LED for sleds 1 and
2 are located on the left control panel.
-
The power-on indicator and system identification LED for sleds 3 and
4 are located on the right control panel.
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
NOTE:
operating system, press the power button.
Press the system ID button:
•
To locate a particular sled within the enclosure.
•
To turn the system ID on or off.
NOTE:
hold the system ID button (for more than five seconds) to
enter the BIOS progress mode.
Press the power button to turn the sled on or off.
The power-on indicator turns amber when a critical system event
occurs.
drives 12-17 mapped to sled 3
right control panel
(optional) NVMe hard drive location
To gracefully shut down an ACPI-compliant
If the sled stops responding during POST, press and