Dell VxRail G560F 소유자 매뉴얼 - 페이지 31
{카테고리_이름} Dell VxRail G560F에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VxRail G560F 33 페이지.
Dell VxRail G560F에 대해서도 마찬가지입니다: 소유자 매뉴얼 (32 페이지)
페이지 인쇄
•
Up to two RDIMMs can be populated per channel.
•
Up to two LRDIMMs can be populated per channel.
•
If memory modules with different speeds are installed, they will operate at the speed of the slowest installed memory module(s) or
slower depending on appliance DIMM configuration.
•
Populate memory module sockets only if a processor is installed. For single-processor appliance, sockets A1 to A12 are available. For
dual-processor appliance, sockets A1 to A12 and sockets B1 to B12 are available.
•
Populate all the sockets with white release tabs first, and then followed by the black release tabs.
•
In a dual-processor configuration, the memory configuration for each processor should be identical. For example, if you populate socket
A1 for processor 1, then populate socket B1 for processor 2, and so on.
Expansion cards
PCIe slot priority
Table 27. Supported expansion options
Riser
PCIe Slot (slot 4)
Mezzanine slot (slot 1)
Open Computing Project
(OCP) mezzanine slot
(slot 3)
Riser slot (SATA M.2)
(slot 5)
NOTE:
For the expansion bus specification see
Table 28. Supported expansion cards
Location
Card type
OCP (slot 3)
Intel CNA X710 -
Dual Port Adapter
Mezzanine (slot 1)
Dell HBA H330 mini
Adapter
Slot 5
SATA M.2
Slot 4
Intel Ethernet CNA
XL710-Q2 Adapter
Slot 4
Intel Ethernet 10G
Dual Port X550-t
Adapter
Form factor
Slot
Low profile
4
Mezzanine
1
Mezzanine
3
Low profile
5
Expansion bus
Form factor
Mezzanine
Mezzanine
Low profile
Low profile
Low profile
CPU mapping
CPU1
CPU1
CPU1
CPU2
specifications.
Link width
x8
x8
x16
x8
x4
Slot width
Maximum power
consumption
PCIe Gen3 x16 (x16
75 W
connector)
PCIe Gen3 x8 (through
25 W
Bridge Board)
PCIe Gen3 x16
25 W
PCIe connector data
25 W
lanes not used for M.2
SATA Riser
Slot priority
Maximum number of
cards
3
1
1
1
4
1
4
1
4
1
Replacing and adding hardware
31