Dell VxRail P670F 설치 및 서비스 매뉴얼 - 페이지 11

{카테고리_이름} Dell VxRail P670F에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VxRail P670F 35 페이지.
Dell VxRail P670F에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (40 페이지)

페이지 인쇄

Item

Ports, panels, or slots

Power supply unit (PSU

VGA port

USB 3.0 port (1)

iDRAC dedicated port

System identification

button

OCP NIC port

NIC port (1,2)

Power supply unit (PSU 1)

For more information about supported drives, see the Dell VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.

Rear view of the VxRail V670F with double width expansion card riser

Icon

Description

For more information about the PSU configurations, see the Dell

VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.

For more information about the VGA, see the Dell VxRail™ P670F,

P670N, V670F, and S670 Technical Specifications.

This port is USB 3.0-compliant.

Enables you to remotely access iDRAC. For more information, see the

iDRAC User's Guide at www.dell.com/poweredgemanuals.

Press the system ID button:

● To locate a particular system within a rack.

● To turn the system ID on or off.

To reset iDRAC, press and hold the button for more than 16 s.

NOTE:

● To reset iDRAC using system ID, ensure that the system ID

button is enabled in the iDRAC setup.

● If the system stops responding during POST, press and hold

the system ID button (for more than 5 s) to enter the BIOS

progress mode.

N/A

This port supports OCP 3.0. The NIC ports are integrated on the

OCP card which is connected to the system board.

The NIC ports are embedded on the LOM card that is connected to

the system board.

For more information about the PSU configurations, see the on

product documentation page.

System overview