Dell VxRail V670F 설치 및 서비스 매뉴얼 - 페이지 13
{카테고리_이름} Dell VxRail V670F에 대한 설치 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell VxRail V670F 40 페이지.
Dell VxRail V670F에 대해서도 마찬가지입니다: 설치 및 서비스 매뉴얼 (35 페이지)
페이지 인쇄Item
Ports, panels, or slots
4
PCIe expansion card riser
2 (slot 4 and slot 5)
5
USB 2.0 port (1)
6
PCIe expansion card riser
4 (slot 7)
7
Power supply unit (PSU
2)
8
VGA port
9
USB 3.0 port (1)
10
iDRAC dedicated port
11
System identification
button
12
OCP NIC port
13
NIC port (1,2)
14
Power supply unit (PSU 1)
For more information about supported drives, see the Dell VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.
Inside the system
The following figure and list contains components inside the system:
Icon
Description
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
This port is USB 2.0-compliant.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
For more information about the PSU configurations, see the Dell
VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.
For more information about the VGA, see the Dell VxRail™ P670F,
P670N, V670F, and S670 Technical Specifications.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at www.dell.com/poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16 s.
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold the
system ID button (for more than 5 s) to enter the BIOS progress
mode.
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is connected to
the system board.
For more information about the PSU configurations, see the on
product documentation page.
System overview
13