Dell Wyse 3000 설치 및 설정 매뉴얼 - 페이지 19

{카테고리_이름} Dell Wyse 3000에 대한 설치 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Wyse 3000 19 페이지. Edge series microserver
Dell Wyse 3000에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Can't update the value of "testScriptDemo" (or

testValue) on the ThingWorx platform after

sending $port.WriteLine from the host

computer.

Cannot locate updated files on the Dell Device

after restarting.

Error while attempting to open a websocket

connection.

This guide has been tested for compatibility with the Dell WYSE 3000 and the following ThingWorx

platform and operating system:

ThingWorx Platform Version

ThingWorx 6.0.1

Try manually opening the serial port: a) Close "wsems" and

"luaScriptResource". b) Open a command line window and open the

serial port, following the steps earlier in this guide to connect via serial

port. c) restart "wsems" and "luaScriptResource". If the

luaScriptResource runs, then type $port.Close() on the command line

window on the Dell Device to avoid two programs "fighting" to use the

port.

The device may automatically wipe all new installed software and added

files or folders each time you restart. Backup the files before shutting

down the machine.

Confirm that the Dell device has access to the internet.

Confirm the accuracy of the IP address and port numbers in the

settings.json file.

Confirm the appKey authenticity in the settings.json file.

Confirm that the ThingWorx platform at the IP address specified in the

settings.json file is up and running.

Windows 7, Service Pack 1

ThingWorx EMS Setup Guide

for the Dell WYSE 3000

Page 4-16