Dell 210-ALIO 사용자 설명서 - 페이지 44

{카테고리_이름} Dell 210-ALIO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell 210-ALIO 48 페이지.

Built-in diagnostics

Your monitor has a built-in diagnostic tool that helps you determine if any screen

abnormality you experience is an inherent problem with your monitor, or with your

computer and video card.

NOTE: You can run the built-in diagnostics only when the video cable is

unplugged and the monitor is in self-test mode.

To run the built-in diagnostics:

1. Ensure that the screen is clean (no dust particles on the surface of the screen).

2. Unplug the video cable(s) from the back of the computer or monitor. The

monitor then goes into the self-test mode.

3. Press and hold Button 1 for 5 seconds. A gray screen appears.

4. Carefully inspect the screen for abnormalities.

5. Press Button 1 on the bottom of the monitor again. The color of the screen

changes to red.

6. Inspect the display for any abnormalities.

7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white and text

screens.

The test is complete when the text screen appears. To exit, press Button 1 again.

If you do not detect any screen abnormalities upon using the built-in diagnostic tool,

the monitor is functioning properly. Check the video card and computer.

Troubleshooting