Dell E19WFP 사용자 설명서 - 페이지 22

{카테고리_이름} Dell E19WFP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E19WFP 45 페이지.

Exit — Select to exit out of Reset to Factory Settings menu without resetting any OSD options.

Position settings only — Change the settings for Image Position back to original factory settings.

Color settings only — Change the Red, Green, and Blue settings back to their original factory settings and set the default setting

for Normal Preset.

All settings — Change all the user-adjustable settings including color, position, brightness, contrast, and OSD hold time to the

factory defaults. The language of the OSD does not change.

IR (Image Retention) — The feature helps reduce minor cases of image retention.

DDC/CI (Display Data Channel/Command Interface) — allows you to adjust the monitor parameters (brightness, color, balance,

etc.) via software applications on your PC.

Select Disable to disable this feature.

For best user experience and optimum performance of your monitor, keep this feature enabled.

NOTE:If you select 'disable' for DDC/CI,a warning message as shown in the picture above appears on the screen.Then you can

select Yes or No according to need.

OSD Warning Messages

One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.

Optimum Resolution 1440 x900 60Hz

1 : Auto Detect (Analog Input)

Cannot Display This Video Mode

1 : Auto Detect (Digital Input)

Cannot Display This Video Mode

Optimum Resolution 1440 x900 60Hz