Dell E2218HNf 사용자 설명서 - 페이지 37

{카테고리_이름} Dell E2218HNf에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E2218HNf 45 페이지.

Troubleshooting

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instruction

Your monitor provides a self-test feature that allows you to check whether your monitor

is functioning properly. If your monitor and computer are properly connected but the

monitor screen remains dark, run the monitor self-test by performing the following

steps:

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.

3. Turn on the monitor.

The floating dialog box should appear on-screen (against a black background) if

the monitor cannot sense a video signal and is working correctly. While in self-

test mode, the power LED remains white. Also, depending upon the selected

input, one of the dialogs shown below will continuously scroll through the screen.

4. This box also appears during normal system operation, if the video cable becomes

disconnected or damaged. The monitor will enter Power Save Mode after 4

minutes if left at this state.

5. Turn off your monitor and reconnect the video cable; then turn on both your

computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your

video controller and computer, because your monitor is functioning properly.

Troubleshooting