Dell E228WFP 사용자 설명서 - 페이지 25

{카테고리_이름} Dell E228WFP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell E228WFP 38 페이지. Flat panel monitor
Dell E228WFP에 대해서도 마찬가지입니다: 설정 매뉴얼 (2 페이지), 브로셔 및 사양 (3 페이지), 팩트 시트 (4 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄

Auto Adjust

Power Button and Indicator

Using the OSD Menu

NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those

changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.

1. Push the MENU button to open the OSD menu and display the main menu.

Main Menu for Auto Detect Analog (VGA) Input

Main Menu for Analog (VGA) Input

Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the

monitor self-adjusts to the current input:

Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can

further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.

NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals

or attached cables.

Use the power button to turn the monitor on and off.

The green light indicates the monitor is on and fully functional. An amber light indicates power save mode.

Main Menu for Auto Detect Digital (DVI) Input

Main Menu for digital (DVI) Input

Auto Adjust In Progress