2Y-LINK PF068C12 사용자 설명서 - 페이지 4

{카테고리_이름} 2Y-LINK PF068C12에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 2Y-LINK PF068C12 4 페이지. Push fit mixer

Notes :

For cameras with operation current up to 680mA and transient peak current up to

1000mA, also a PS-10KU power stabilizer is normally required.

For camera power over 8W and/or covering extended distances, local power supply

for camera is required.

If local power is needed for camera and ground level difference effect occurs, the

Ground Loop Isolator (PF-ISO/PT-ISO) can be installed together with Mixer to

eliminate electrical noise and hum.

For camera power range 9-16W (1300mA/12VDC), High Power Model (Signal

Processor : CI-01-ASP-DI, Mixer : PF150A12D) can be used. [ NO local power for

camera]

Specification

Video input

Power Supply

Operating temperature

Dimensions

Suitable for any Camera with following specification:

Each Camera Rating

Each Camera Video output

PF-ISO

: 1Vp-p 75-ohm

: 48VDC .Max

: -10°C ~ + 50°C

: 65mm x 35mm x 32mm

: 12V & 24V, 8W. Max.

: 1Vp-p 75-ohm

PT-ISO