Allied Telesis Rapier 48i 빠른 설치 매뉴얼 - 페이지 10

{카테고리_이름} Allied Telesis Rapier 48i에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Allied Telesis Rapier 48i 12 페이지. Rapier switch
Allied Telesis Rapier 48i에 대해서도 마찬가지입니다: 데이터시트 (6 페이지), 빠른 설치 매뉴얼 (11 페이지), 데이터시트 (3 페이지), 데이터시트 (3 페이지), 데이터시트 (2 페이지), 빠른 설치 매뉴얼 (13 페이지), 빠른 설치 매뉴얼 (12 페이지)

Browse to the GUI.

If you access the Internet through a proxy server, set your browser to

bypass the proxy for the IP address you just assigned to the VLAN1

interface.

Point your web browser at the IP address of the VLAN interface.

At the log in prompt, enter the log in name and password. Passwords are

case sensitive.

User Name: manager

Password: friend

The system status page appears and you can now use the GUI to configure

the switch.

To ensure configuration settings are saved correctly, use the GUI menus and buttons to

navigate, not your browser's buttons.

As a security precaution, change the password as soon as possible.

To change the password, select Management > Users from the sidebar

menu. Select the Manager account and click Modify.

To access context-sensitive help in the GUI.

Click on the Help Button [Help]. The Help button is located at the top of

the sidebar menu or on any popup page.

System LEDs

LED

State

Power

Green

Fault

Red

1 flash

3 flashes

4 flashes

5 flashes

Rapier Series Switch

Function

The switch is receiving power and the voltage

is within the acceptable range

The switch or management software is

malfunctioning

A switch fan has failed. (The LEDs will not

indicate an RPS fan failure.)

If an RPS is connected, the switch's PSU (Power

Supply Unit) has failed

If RPS monitoring is enabled, the RPS PSU has

failed

If RPS monitoring is enabled, an RPS is not

connected or is not operational

C613-04017-01 REV H