ensto AVR66 Series 사용 설명서 - 페이지 6
{카테고리_이름} ensto AVR66 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ensto AVR66 Series 6 페이지. Hf radar sensor
ensto AVR66 Series에 대해서도 마찬가지입니다: 설치 및 운영 지침 (4 페이지)
페이지 인쇄
3. SERVICING AND TESTING
The following minimum inspections and tests shall be carried out at the intervals as follows.
All the routine examinations, tests, defects and alterations shall be recorded in a log book.
DAILY
•
The emergency luminaires shall be visually inspected for correct operation.
•
Broken light source shall be changed.
MONTHLY
•
All luminaires shall be checked to ensure that they are present, clean and functioning correctly.
•
Switch on in the emergency mode each luminaire from its battery by simulation of a failure of the
supply to the normal lighting for a period suffi cient to ensure that light source is illuminated.
•
At the end of this test period, the supply to the normal lighting should be restored and any indicator
lamp or device checked to ensure that it is showing that the normal supply has been restored.
ANNUALLY
•
Each luminaire shall be tested for its full rated duration in emergency mode.
4. TECHNICAL INFORMATION
Luminaire
AVR320.110L/1M
AVR320.1105DL/1M
AVR320.114L/1M
AVR320.1145DL/1M
AVR400.118L/1M
AVR400.1185DL/1M
AVD370.114L/1M
AVD370.1145DL/1M
AVD370.118L/1M
AVD370.1185DL/1M
AVR66.120L/1M
AVR66.1205DL/1M
Rated duration of emergency operation:
Operating temperature:
Ensto Lighting Oy
Hepolammentie 25
FIN-08680 Lohja, Finland
Tel. +358 19 328 51
Customer service +358 19 328 51
Fax. +358 19 382 856
www.ensto.com
6
Light source
Battery
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 20W LED
NiCd 3,6V / 1,6 Ah
1 x 20W LED
NiCd 3,6V / 1,6 Ah
1 h
-5...+25 oC
BLF
0,35
0,35
0,27
0,27
0,19
0,19
0,27
0,27
0,19
0,19
0,15
0,15