Dell UltraSharp 2009W 사용자 설명서 - 페이지 25
{카테고리_이름} Dell UltraSharp 2009W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp 2009W 27 페이지. Flat panel monitor
Dell UltraSharp 2009W에 대해서도 마찬가지입니다: 사양 (2 페이지), 설정 매뉴얼 (2 페이지), 설정 (2 페이지)
페이지 인쇄
Missing Pixels
Stuck-on Pixels
Brightness Problems
Geometric Distortion
Horizontal/Vertical Lines Screen has one or
Synchronization Problems Screen is
Safety Related Issues
Intermittent Problems
Missing Color
Wrong Color
Image retention from a
static image left on the
monitor for a long period
of time
Downloaded from ManualMonitor.com Manuals
LCD screen has
Cycle power on-off.
l
spots
Pixel that is permanently off is a natural defect that can occur in LCD technology.
l
LCD screen has
Cycle power on-off.
l
bright spots
Pixel that is permanently off is a natural defect that can occur in LCD technology.
l
Picture too dim or
Reset the monitor to Factory Settings.
l
too bright
Auto Adjust via OSD.
l
Adjust brightness & contrast controls via OSD.
l
Screen not
Reset the monitor to Factory Settings.
l
centered correctly
Auto Adjust via OSD.
l
Adjust brightness & contrast controls via OSD.
l
NOTE:
When using '2: DVI-D', the positioning adjustments are not available.
Reset the monitor to Factory Settings.
l
more lines
Perform Auto Adjust via OSD.
l
Adjust Phase and Pixel Clock controls via OSD.
l
Perform monitor self-test feature check and determine if these lines are also in self-test mode.
l
Check for bent or broken pins in the video cable connector.
l
NOTE:
When using '2: DVI-D', the Pixel Clock and Phase adjustments are not available.
Reset the monitor to Factory Settings.
l
scrambled or
Perform Auto Adjust via OSD.
l
appears torn
Adjust Phase and Pixel Clock controls via OSD.
l
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode.
l
Check for bent or broken pins in the video cable connector.
l
Restart the computer in the safe mode.
l
Visible signs of
Do not perform any troubleshooting steps.
l
smoke or sparks
Contact Dell immediately.
l
Monitor
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
l
malfunctions on &
Reset the monitor to Factory Settings.
l
off
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
l
Picture missing
Perform monitor self-test feature check.
l
color
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
l
Check for bent or broken pins in the video cable connector.
l
Picture color not
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending to the
l
good
application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the
l
Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
l
Faint shadow from
Use the Power Management feature to turn off the monitor at all times when it is not in use (for more
l
the static image
information, see
displayed appears
Alternatively, use a dynamically changing screensaver.
l
on the screen
Power Management
Modes).