Dell UltraSharp U2412M 사용자 설명서 - 페이지 42
{카테고리_이름} Dell UltraSharp U2412M에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp U2412M 43 페이지. Dell u2412m monitor user's guide
Dell UltraSharp U2412M에 대해서도 마찬가지입니다: 사양 (3 페이지), 설정 매뉴얼 (2 페이지), 제품 치수 (1 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (49 페이지)
페이지 인쇄
Dell™ Soundbar Problems
Common Symptoms
No Sound
No power to Soundbar - the
power indicator is off
No Sound
Soundbar has power - power
indicator is on
Distorted Sound
Computer's sound card is used
as the audio source
Distorted Sound
Other audio source is used
Unbalanced Sound Output
Sound from only one side of
Soundbar
Low Volume
Volume is too low
Back to Contents Page
What You Experience
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if
l
the power indicator (Blue LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the adapter.
l
Plug the audio line-in cable into the computer's audio out jack.
l
Set all Windows volume controls to their maximum.
l
Play some audio content on the computer (i.e. audio CD, or MP3).
l
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
l
Clean and reseat the audio line-in plug.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
l
Set all Windows volume controls to their midpoints.
l
Decrease the volume of the audio application.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the audio
l
source.
Decrease the volume of the audio source.
l
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume
l
setting.
Clean and reseat the audio line-in plug.
l
Clear any obstructions between the Soundbar and the user.
l
Confirm that the audio line-in plug is completely inserted into the jack of the sound card
l
or audio source.
Set all Windows audio balance controls (L-R) to their midpoints.
l
Clean and reseat the audio line-in plug.
l
Troubleshoot the computer's sound card.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Clear any obstructions between the Soundbar and the user.
l
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume
l
setting.
Set all Windows volume controls to their maximum.
l
Increase the volume of the audio application.
l
Test the Soundbar using another audio source (i.e. portable CD player).
l
Possible Solutions