Dell UltraSharp UP3218K 사용자 설명서 - 페이지 42
{카테고리_이름} Dell UltraSharp UP3218K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp UP3218K 50 페이지.
Dell UltraSharp UP3218K에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 서비스 매뉴얼 (14 페이지), 분해 매뉴얼 (6 페이지)
페이지 인쇄
Troubleshooting
WARNING: Before you begin any of the procedures in this section, follow the
Safety
Instructions.
Self-Test
Your monitor provides a self-test feature that allows you to check whether your monitor
is functioning properly. If your monitor and computer are properly connected but the
monitor screen remains dark, run the monitor self-test by performing the following
steps:
1
Turn off both your computer and the monitor.
2
Unplug the video cable from the back of the computer. To ensure proper Self-Test
operation, remove all digital and the analog cables from the back of computer.
3
Turn on the monitor.
The floating dialog box should appear on-screen (against a black background), if the
monitor cannot sense a video signal and is working correctly. While in self-test mode,
the power LED remains white. Also, depending upon the selected input, one of the
dialogs shown below will continuously scroll through the screen.
4
This box also appears during normal system operation, if the video cable becomes
disconnected or damaged.
5
Turn off your monitor and reconnect the video cable; then turn on both your
computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your
video controller and computer, because your monitor is functioning properly.
42
|
Troubleshooting
Dell UltraSharp 32 Monitor
No DP 1 Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
or
Dell UltraSharp 32 Monitor
No DP 2 Cable
The display will go into Power Save Mode in 4 minutes.
www.dell.com/support/monitors
UP3218K
UP3218K