DHD 52/SX 설치 매뉴얼 - 페이지 8

{카테고리_이름} DHD 52/SX에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DHD 52/SX 14 페이지. Series 52 compact mixing console

1. Assembling and Wiring the Hardware

Assembling and Wiring the Hardware

In the following you can find information on the mechanical assembling and wiring of an 52/SX Mixing Console.

5.1

Installation Information XS Core and XS Multi-I/O Box

Specifications and design are subject to change without notice. The content of this document is for information only. The information presented in this document does not form part

of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.

Publication thereof does neither convey nor imply any license under patent rights or other industrial or intellectual property rights.

Warning

Avoid damaging components by electrostatic discharge (ESD).

Before you touch or mount electronical components, make sure you do not carry

any electrostatic charges. Earth yourself using a grounded metal object (heater,

rack) to divert electrostatic charges immediately before you touch electronical

components.

Front view of XS Core and XS Multi-I/O Boxes installed in a 19'' mounting

Warning

In a 19"-rack, in order to ensure the air flow for cooling the device, at least one

empty rack unit (1 U) is required above and below the XS Core and XS Multi-I/O

Box.

If more heat-emitting devices are mounted in the rack, more space for

ventilation is necessary. Do not cover the perforated metal plates on top and on

the sides of the cases.

Generally, avoid operating devices which produce much heat close to the XS

Core and Multi-I/O Boxes.

Assembling and Wiring the Hardware

rack.

Version 1.3.0 - 07.11.2011