Dell UltraSharp UP3218KA 사용자 설명서 - 페이지 22

{카테고리_이름} Dell UltraSharp UP3218KA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell UltraSharp UP3218KA 50 페이지.

Dell UltraSharp UP3218KA 사용자 설명서
2. Connection Guide for 8K4K 30Hz (max.) Resolution (Single DP
Cable)
1. Follow the connection guide below for DP
cables connection.
2. Turn On the monitor by pressing the power
on/off button.
DP1
DP2
C
DP – DP cable (1x)
Use one of the DP – DP
D
cables to connect DP
port on monitor to the DP
port on notebook
NOTE: Always update your VBIOS to the latest. For more information, refer to Dell
www.Dell.com) or AMD (http://www.AMD.com) or nVidia (http://www.NVIDIA.com) or
graphics card vendor websites.
22
|
Setting Up the Monitor
1. Notebook with DP port
C
D
3. Power up/ Boot up the computer or notebook.
4. Change resolution if necessary up to 7680 x
4320 30Hz.
• Graphics card requirement:
Single DP port that is compliant to
DP1.4 support HBR3.
• Recommended list of cards:
nVidia GeForce series : GTX1070/1080,
Quadro series : P5000/6000.
AMD Radeon series : RX480/WX7100.
Ensure the graphics card has 2 or more
DP outputs.
• Graphics card requirement:
With two DP ports that are compliant to
DP1.4 support
HBR3, DisplayID 1.3 supporting Tile
Display feature.
• AMD driver version:
• nVidia driver version:
Troubleshooting
1. BIOS/Post screen is not observed,
• To speed up monitor
2. Black screen :
• Ensure the graphics card support
3. Cannot achieve or image unstable
• Ensure your graphics card is
• Use only the in-box DP cables for
revision later than 17.10 or later
http://support.amd.com/en-us/download
revision later than 381.xx or later
http://www.nvidia.com/Download/index.
aspx?lang=en-us
black screen during BIOS/Post,
long period of black screen when
monitor wake from standby mode:
initialization, disable monitor
Sleep by OSD (Menu>Energy
Settings>Monitor Sleep> Disable).
DP1.4 (older DP1.1 version is not
supported by UP3218KA).
at 8k4k resolution:
capable to support 8k4k.
connection to your PC.
Non-DP certified or low quality
DP cable may degrade signal
integrity/bandwidth, resulting in
reduced performance.
(http://