EarthLinked HCM-4272C 설치 매뉴얼 - 페이지 9
{카테고리_이름} EarthLinked HCM-4272C에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. EarthLinked HCM-4272C 11 페이지. Hybrid cooling module
페이지 인쇄Installation – Electrical and Start-Up
1. After turning "OFF" power to all EarthLinked
appropriate breakers remove the Hybrid Cooling Module control box access panel.
2. Connect appropriately sized line voltage wires and ground wire to the Hybrid Cooling
Module, as shown in Figure 5.
The Hybrid Cooling Module cabinet must have an unbroken ground. The
ground must be installed in accordance with applicable electrical codes.
Failure to follow this warning can result in injury, fire or death.
3. The Hybrid Cooling Module contains a pressure actuated fan speed control that has been
factory set for a pre-determined R-410A system condensing pressure.
4. Check all wiring and electrical connections to ensure proper routing and good
contact before restoring electric power, evacuating and recharging system in accordance
with the current EarthLinked
HCM-410CP-IM (12/15)
Figure 5. Hybrid Cooling Module Field Wiring
WARNING!
®
system installation manual.
®
and field supplied system components at the
Page 9