Dell CONAE 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Dell CONAE에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell CONAE 36 페이지. Direct-attach storage for poweredge serve

The rack mounting rails provided with the enclosure fit in 19-inch rack cabinets. The rails have been designed and tested for the

maximum enclosure weight and rack capacity. Use of other mounting hardware may cause some loss of rack space.

First install the rails that were shipped with the unit onto your rack.

Steps

1. Identify the rack holes to use for installing the rails in the racks.

2. Press the latch on the rear rail bracket and insert the rail into the rack post. Release the latch to lock the rail in place.

Figure 7. Connecting the rail to the back post

3. Extend the rail to fit between the front and rear rack posts.

4. Insert the pins on the front of the rail into the rack holes of the front rack post.

Figure 8. Attaching the rail to the front post

5. Secure the front rail bracket with one screw.

6. Secure the rear rail bracket with one screw.

Installing the enclosure in the rack