Dell CX200 플랫폼 매뉴얼 - 페이지 5

{카테고리_이름} Dell CX200에 대한 플랫폼 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell CX200 10 페이지. Nas fibre channel cluster systems

This document provides information for installing and connecting peripheral hardware, storage,

and storage area network (SAN) components to your Dell™ PowerVault™ NAS Fibre Channel

Cluster solution. The configuration information in this document is specific to the Microsoft

Windows

Storage Server 2003, Enterprise Edition operating system.

This document covers the following topics:

•

Configuration information for installing peripheral hardware components (such as HBAs,

NICs, and PCI adapter cards) in NAS cluster configurations

•

Configuration rules and guidelines for direct-attached or SAN-attached configurations

NOTICE:

Configurations not listed in this document may not be certified or supported by Dell or

Microsoft.

NOTICE:

In this guide and in other cluster documentation, the Microsoft Cluster Service (for Windows

Storage Server 2003, Enterprise Edition) is also referred to as MSCS.

Supported Cluster Configurations

This section provides information about supported cluster configurations for your NAS cluster

configuration.

Table 1-1 provides a list of supported cluster configurations for NAS cluster systems.

NOTE:

Each cluster node must be the same system model and have two or more processors.

Supported

Supported Storage Systems Supported Cluster Interconnect

PowerVault

NAS Systems

770N, 775N

Dell | EMC CX600,

Dell | EMC CX400, and

Dell | EMC CX200

Obtaining More Information

See the Dell PowerVault NAS Fibre Channel Cluster Systems Installation and Troubleshooting Guide

for a detailed list of related documentation.

HBA (for the Private Network)

Any Ethernet NIC supported

by the system

NOTE:

All nodes in the same

cluster must use homogeneous

(identical) Ethernet NICs for the

cluster interconnect.

Platform Guide