Dell Dell PowerVault MD32X0 구현 매뉴얼 - 페이지 26

{카테고리_이름} Dell Dell PowerVault MD32X0에 대한 구현 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dell PowerVault MD32X0 33 페이지. Storage arrays

PowerVault™ MD32X0, MD32X0i, and MD36X0i Series of Storage Arrays: Implementing Hyper-V

Storage Section

Figure 14.

Your VM is now highly available. You can click Live Migrate to move the VM without downtime to

another node. This process lets you balance the load between nodes without affecting your VMs or lets

you move VMs to another node if you need to do maintenance on one node. The Live Migration feature

is new in the Windows Server 2008 Release 2 operating system and is transparent to the VM.

Configuring a Virtual Machine for Live Migration

After you have Hyper-V Cluster running correctly, you can use the Live Migration feature of the

Windows Server 2008 Release 2 operating system for VMs.

The Live Migration feature can be very useful if you need to balance workloads between different

nodes in your cluster, or if you need to shut down one node for maintenance.

To use the Live Migration feature, you must use Cluster-Shared Volumes (CSVs) for your VMs. CSV must

be available for all of the nodes in the cluster.

1. Open the Failover Cluster Manager, and select Cluster Shared Volumes.

2. Click the right pane, and select Add Storage.

3. Select the disk that you want to add.

After you add the drive, the drive appears in the disk column. Make sure that you

remember the path of the drive. In the example, the path is

C:\ClusterStorage\Volume1.

4. Configure a VM using this cluster shared volume.

Page 24